• The Mega 3 new version 2019 is the latest release by Gold Master Global the exclusive agent of Mega Locators the leading German manufacturer in the field of gold and Metal Detectors

• An easy-to-use device that operates on two detecting systems, the long-range sensor, and Ionic systems with an affordable price that fits all prospectors budgets now you can get it only and exclusively through Gold Master Global

• The MEGA G3 device is the second generation of MEGA DETECTION technology, the best to discover treasures and precious metals such as gold, silver, and diamonds.

• This technology gives accurate results in the toughest terrain (rocks - mountains - deserts).

• In this new version of The Mega G3 Device comes with many new features and updates on the operating system of the device and the electronic radars and the device program to meet the needs and aspirations of the user who searches for gold and treasures

• Using Mega G3 you can search for natural gold veins, buried gold, antique gold treasures, and ancient natural silver up to an underground depth of 40 meters and the device give a carefully explored and amazing high results.

The Mega G3 Features

• Mega G3 The new version is characterized by its ease of use, and its characteristics that qualify the user for gold and metal exploration

• The Mega G3 works effectively in all types of terrain and it is not affected at all by environmental factors such as rocks, mountains, and clay or rocky terrain

• The Device gives you quick and accurate responses, thanks to the German Technology that has provided the dive with High-quality electronic system and a unique practical design.

The Search Systems of the new version of the MEGA G3 2019:

The Long-range sensor system:

• The Mega G3 long-range sensor system is an ideal option for prospectors and treasure hunters where they can scan large and far areas in a short time in an easy and effortless manner.

• The device operates at a distance of 2000 meters on the surface level and underground depth of 40 meters. And it contains eight different scanning programs for gold and metal detection.

To use the sensor system, the device has to be installed as the following:

• The antennas had to be connected to the main unit of the device. And the user has to open the antennas to the maximum possible length.

• The antenna balance can be adjusted from the head of the antenna by rotating it from left to right until it gets the same height between the two antennas

• Then the user had to start the antennas operating through the operation button after selecting the language.

• Then he has to select a searching system from the screen.

• The sensor system in the Mega G3 device has eight search programs which are:

  1. The Row Gold detection program

  2. The Gold Treasures detection Program

  3. The Silver detection program

  4. The Bronze detection program

  5. The Copper detection program

  6. The Gemstones detection program

  7. The Diamond detection program

  8. The Caves and spaces detection program

Controlling the target with square selection style:
This method enables the user to locate the target accurately and gives him a better ability to verify the target's validity.

• The box around the target can be completed with a distance of 200 cm from the center of the target when the user is in the same line with the target and the antennas turn to target.

• The goal of all four aspects is otherwise that there is a possibility that the goal is not real

• A Very important note:

• When using the device to search for the following objectives:Diamonds, precious stones, and platinum

• The deep master unit should be planted into the ground and operated in any nearby random place to make sure that the targets are searched properly and effectively

Measuring thetarget depth:

• At the highest point of the goal enter the nails or the pegs from the depth measuring unit about 8 cm in the ground then Adjust the exact frequency on five then Choose the program of the target from the main unit

• Wait three to four minutes Stand on the target and monitor the antennas which are turning to one side and that will be the first point of the signal,

• After moving from the target point you will notice that the antennas will gradually move forward.

• Then Stop when the antennas turn back on one side and that will be the second point of the signal,

• The approximate depth of the target is the distance between the two signal points

• And then at a distance of 45 degrees from the second signal point. The user had to conduct several measurements for measuring the depth more accurately, the digital voltmeter on the Deep master will show the electrical voltage of the battery

• After choosing the target, the software loading screen will appear followed by the search screen.

• The program name which has been selected by the user will appear with the table of distances and depths.

• The User can switch between the distances and depths through the top and bottom buttons.

• The exact frequency settings can be changed by pressing the bottom button until you hear a different tone and change the value via the Right and left button,

• The user can increase or decrease the frequency to 12 Hz, the rate increase 1 Hz per compression

• It is preferable to leave the exact frequency of the factory set at zero

• The Mega G3 device is characterized by the pre-search depth detecting system very easily before starting the actual search process with the device

• In addition the front range selection of the target detecting by choosing the distance of the front search to be detected accurately according to the area which is needed to be explored whether that area was a mountain or plain area or the valleys or any space within specific buildings.

The Ionic scanning system:

How to Use the Ionic system:

• First, the user need to install the device Mini-Sensor and connect the installation rings, The He needs to choose the Ionic system from the selection systems list, and then the device will show the Ionic oscillations survey on the screen

• The ionic scanning system is used to detect ionic fields that are produced by long-buried underground metals. All metals have their own ionic fields, and that field effect increases by the increase of the period of the underground metal's presence.

• And by the metal acquiring more electronics from the surrounding environment, these effects will be vary depending on the metal different ground factors in this region

• The ionic system is based on the scientific basis of the characteristics of the metal, its chemical composition and the metal rank in the periodic metal table. The ionic scanning system can capture signals from these ionic fields from long distances and can alert the user in case of approaching them

The use and the Calibration of ionic scanner:

• When the device is turned on, please select the Ionic system from the system selection screen

• When starting the system, please re-set the system first by pressing the reset button on the scanner

• After finishing the calibration of the device, start to make some movements starting from the right and left and a few times up and down while walking holding the device,

• When the device detects a target it will issue a sound alert synchronous with an emergence of vibrations in the search screen

• and whenever that signals of the alarm sound and vibrations were increased on the search screen the near you are to the discovered target

• The Ionic system can be used to search from different positions or f high or low areas, and it is never affected by the walking speed of the user

Available languages

• The Mega G3 device is being used all around the world that is why it has 8 operating languages available.

• The user can select one from the list when the device is turned on and the device works according to this language even after the shutdown and restart.

Languages available in the device are: German, English, Russian, French, Spanish, Persian, Turkish, and Arabic

Explanations of the device main unit:

1. Sensors For Signal Boosting

2. Charging Light Alert

3. Charging Input

4. Battery pack

5. Laser Turn on/off Button

6. The laser beam

7. Search antennas

8. Reinforced signal plate

9. Control panel illustrations

10. The device Turn on/off Button

11. The frequency setting can be accessed by long pressing the DOWN button

12. The Sound Mute can be activated by long pressing the UP button

13. Screen lighting can be controlled by long press on the Lift button

14. You can go back to the previous menu by pressing the Right button

15. The enter and select button

16. Switching between magnetometer modes button

17. The magnetometer system and ion system are filtered through the long pressure on the same button

Device Components:

1. Lithium battery works up to 72 hours efficiently

2. Carrying case

3. The main unit of the device

4. Search antennas

5. Headphones

6. Reinforced signal plate

7. Car charger

8. Home charger

9. Charging Cable

10. Mini SENSOR for ionic scanning1

11. Depth measurement unit

12. User Guide